Perry Posted October 22, 2009 Share Posted October 22, 2009 I've only primed before when I paint light over dark, but now I'm wondering if I should always use primer first. If you prime, do you notice a difference? Is it worthwhile? I'm painting SW Latte over a light beige color. TIA. Quote Link to comment Share on other sites More sharing options...
Guest RecumbentHeart Posted October 22, 2009 Share Posted October 22, 2009 (edited) I used to work for a painter and no, we only primed as needed according to the paint and/or colors involved (or stains or patching done to the wall but that was only spot priming). We did always do two coats though. ETA. We did two coats even with "one coat" paint. Your average person does not seem to see the difference between one and two coats but since painting (and being already anal) the difference really stands out, not just in even color coverage but with the finish if you are painting over one finish with a different one (eggshell over flat, for example). Edited October 22, 2009 by RecumbentHeart Quote Link to comment Share on other sites More sharing options...
JFSinIL Posted October 22, 2009 Share Posted October 22, 2009 If the walls are already painted, and you are just changing color, then only prime over any places where you had to spackle to fill a hole or something. But do wash the walls, first, and let dry. Paint will stick better to clean, dry walls. And two coats are better than one. Quote Link to comment Share on other sites More sharing options...
hornblower Posted October 22, 2009 Share Posted October 22, 2009 I don't unless, as you say, I'm covering a dark color. I always use two coats of paint though. Even when I've got good coverage, I find the second coat really gives the color depth. Quote Link to comment Share on other sites More sharing options...
swellmomma Posted October 22, 2009 Share Posted October 22, 2009 depends on the wall. If I have needed to putty anything, or I am covering a pce of artwork by a jr picasso I prime those areas. If I puttied I usually do 2 coats of prime just to be sure. I prime the cabinets too when I am painting those to help the paint stick better. Oh yeah, and I prime the ceiling before painting(we have that ugly 70's popcorn ceiling, and it get paint thirsty so primer is necessary) A lattee color over a light beige should be just fine. Do a double coat and coverage should be fine without primer. Quote Link to comment Share on other sites More sharing options...
Tiff in TX Posted October 22, 2009 Share Posted October 22, 2009 We are in the middle of a kitchen and dining room remodel and we did use primer before we painted. We went from white to sage and we still needed two coats of paint. In hindsight, we probably should have tinted our primer. Quote Link to comment Share on other sites More sharing options...
Spy Car Posted October 22, 2009 Share Posted October 22, 2009 I'm in the middle of prepping our kitchen for a paint-job. I need to prime because I'm skim-coating all the walls with joint compound (dry-wall mud) as the kitchen of old house has painted-over wall-paper on the walls, which I started to remove, and discovered easily peeling lead-paint underneath on top of old-fashioned plaster. That's not good! So burying the lead paint is the best option. Not a particularly helpful post, but I'm stalling (as I need to go mud the ceiling) and I'm sore as heck from using muscles (from holding arms over-head) that haven't been worked this hard in a while :D Bill Quote Link to comment Share on other sites More sharing options...
Spy Car Posted October 22, 2009 Share Posted October 22, 2009 ETA: I was picking up some supplies at Home Depot, and they have a Baer (sp?) paint that claims to be a primer and paint in one. The "paint-guy" when queried said it was really good on walls, but he'd still prime cabinets. For what it's worth. Bill (amateur) Quote Link to comment Share on other sites More sharing options...
AuntieM Posted October 22, 2009 Share Posted October 22, 2009 I will use a primer if I am using an expensive custom paint. If the coverage is going to require three coats, and a plain, neutral primer is less expensive than an additional coat of the good stuff, I start with a layer of primer. I may also use it if the color change is dramatic. Quote Link to comment Share on other sites More sharing options...
Spy Car Posted October 22, 2009 Share Posted October 22, 2009 I'm reading it's best (if you can) to "tint" the primer to semi-match the wall color. What say you? Bill Quote Link to comment Share on other sites More sharing options...
The Governess Posted October 22, 2009 Share Posted October 22, 2009 I'm reading it's best (if you can) to "tint" the primer to semi-match the wall color. What say you? Bill :iagree: We have done this and it really saves time when you are using a darker paint color. The tinted primer acts as your primer and first coat of paint all in one, and hopefully you should only need one coat of actual paint. We usually paint with colors and so we always prime first to cover the previous color. Quote Link to comment Share on other sites More sharing options...
stripe Posted October 22, 2009 Share Posted October 22, 2009 I'm reading it's best (if you can) to "tint" the primer to semi-match the wall color. What say you? Having recently painted my walls, I would say that in my next painting project, I would (in an ideal world) do this. It drove me crazy to find little bits of white underneath my color. Since I did a sort of multicolor thing, not a solid coating, having lighter color peeking through would have been acceptable, whereas white peeking through is ugly. So, I say, do it! Quote Link to comment Share on other sites More sharing options...
Mrs Mungo Posted October 22, 2009 Share Posted October 22, 2009 In our last house we used the Kilz paint that is primer and paint in one. It worked *great* and was easy to wipe down. Quote Link to comment Share on other sites More sharing options...
AuntieM Posted October 22, 2009 Share Posted October 22, 2009 In our last house we used the Kilz paint that is primer and paint in one. It worked *great* and was easy to wipe down. Another vote for Kilz paint, I love it, too. Almost forgot about that option... Quote Link to comment Share on other sites More sharing options...
rwjx2khsmj Posted October 24, 2009 Share Posted October 24, 2009 I'm reading it's best (if you can) to "tint" the primer to semi-match the wall color. What say you? I've used tinted primer when painting a white wall dark red and when painting a maroon wall a lighter taupe color. It really helps. Both those primers were tinted a grey color not the color of the actual paint. I only knew to use tinted primer because the paint guy told me it was recommended with the color I had selected. Quote Link to comment Share on other sites More sharing options...
Mommyof4ks Posted October 24, 2009 Share Posted October 24, 2009 If the walls are already painted, and you are just changing color, then only prime over any places where you had to spackle to fill a hole or something. But do wash the walls, first, and let dry. Paint will stick better to clean, dry walls. And two coats are better than one. :iagree: Be sure to add texture to places that need it also if you have dents or whatever. Washing the walls is very important. Quote Link to comment Share on other sites More sharing options...
KidsHappen Posted October 24, 2009 Share Posted October 24, 2009 I always prime and use two coats of paint but I am very anal. I get great coverage though. Now if I can just master the taping and cutting in along the ceilings, I could be a professional. Quote Link to comment Share on other sites More sharing options...
Mrs. H Posted October 24, 2009 Share Posted October 24, 2009 I'm usu. just a lurker, but am also going to be painting soon and am wondering if you all generally sand the walls also (and if so, do you sand b/t coats)? An apartment I lived in many years ago had beautifully smooth painted walls. The landlord said he always sanded in between coats- but that seems like so much work! Quote Link to comment Share on other sites More sharing options...
AngieW in Texas Posted October 24, 2009 Share Posted October 24, 2009 I wash the walls, then do one coat of tinted primer and one coat of paint. If necessary, I will do a second coat of paint. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.